Euroclean Wet/Dry 215 HEPA Vacuum Designed with the professional user in mind, the Euroclean EWD215-H Wet/Dry HEPA Filter Vacuum combines durability and exceptional performance. Wet or dry applications, excellent filtration, first-rate suction power, low noise level and easy maneuverability are just some of the outstanding features.  Call today 317.322.5200 and receive the special price of only $485! While supplies last

Click here to see the filters and accessories also on sale 

Fiberlock 8319 Shockwave Botanical and Silver Disinfectant is a broad spectrum, non-corrosive, odorless, colorless, botanical based disinfectant and for the month of March will be buy three gallons for $39.95 get the fourth free!

Fiberlock Green 24 kills most deadly microorganisms, yet is safe for everyday use. First new disinfectant technology approved by the EPA in over 30 years and works 20 times faster than traditional disinfectants.

It contains no ammonia, chlorine, oxidizers, phenols, alcohols, dyes or fragrance.  No personal protective equipment (PPE) is required.  No warning labels or first aid statements needed.

Green 24 is a powerful disinfectant that kills resistant organisms such as VRE and MRSA.  Unlike other disinfectants Shockwave Green 24 offers added protection by continuing to provide residual efficacy 24 hours after application.

The category IV rating (lowest toxicity), rapid kill and residual protection makes ShockWave Green 24 an ideal solution for everything from infection control to children's toys.

This month Essco will offer Sentinel 538 Sealer/Primer Odor Encapsulant Pail for only $150! Regularly priced at $170 this water based multi-surface sealer/primer is used to seal and trap odors commonly found on restoration projects like smoke and many other odors.  Sentinel 538 works great as part of a two-part system and should be used after affected areas have been cleaned and treated with Sentinel 522 Smoke and Odor Destoryer.

Directions for use (Professional use only):

Apply Sentinel 538 using a brush, medium nap roller, or spryer.  Apply a thin coat.

When spraying 538 mix contents thoroughly and use a .020 tip

Allow 538 to dry thoroughly  (a minimum of 120 minutes).  If necessary, a second coat can be applied after first coat is completely dry.  If spraying 530 in HVAC ducts or systems, allow to dry for 2 hours before recirculating fresh air.  Fresh air should be carefully inspected for odors before ventilating into occupied spaces.  The use of a MSHA/NIOSH respirator is recommended when exposed spray mist or in areas of poor ventilation.

Clean up: Undried product and painting equipment can be cleaned with soap and water wile 538 is still wet.  

Sentinel is available in both white and clear finishes

To check out our entire Sentinel line click here

Check out our line of Moty-Ko Drills under Hot Products

Decemember is here already and Essco can help you with any winter safety needs! Listed below are some products to help you stay warm this winter season:

OccuNomix Hard Hat Liners- Help keep your head warm with a fleece liner for your hard hat

MSA Hard Hat Liners Designed with warmth in mind 

Winter Lined Leather Driver Gloves-Keep your hands warm with fleece lined gloves

Shovels- Choose between hard plastic or steel shovels for your everyday needs

Hand warmers-Simply open to activate and put inside gloves to stay warm

Stock up and save 10% off regular price today and all through November! Essco carries Sentinel 522 Smoke and Odor Destroyer in a three different package options: Per Gallon, 5- Gallon Pail, or  Wipes 290/pail.

Sentinel 522 Smoke & Odor Cleaner & Destroyer is a professional strength, odor control product used to eliminate odors commonly associated with restoration projects like smoke and damp musty smells.  Sentinel 522 can be used as an odor control additive to clean smells fromhard surfaces as well as soft goods and other materials.

Please check out the Sentinel and Essco’s complete line of fire and odor restoration products including encapsulants, cleaners and other odor control products. (Click here) or on the pictures below

Sentinel 522 is non-flammable and non-hazardous and can be used as part of a professional cleaning process without the concerns normally associated with other flammable odor control products. Online ordering is available (click here) to order or call 317.322.5200 toll free 1.800.899.8863

Advanced Peroxide Cleaner is now available at Essco.  The mold and mildew stain remover is the most advanced cleaner available for the restoration and remediation professional.  It is specifically formulated for use on mold remediation and water damage products.  IAQ Advanced Peroxide Cleaner aggressively removes stains and odors caused by mold, mildew and other microbial growth on porous, and non-porous materials. More product information available at www.Fiberlock.com

Product Offerings:

• Low odor
• Non-Caustic
• "Green" Product Reduces to Oxygen and Water
• Easily shippable
• No license on certification required
• Available by the case (2-2.5 Gallons) OR by pail (1-2.5 gallon container)
• Does NOT leave chemical residue
• Coverage: 500ft2 per gallon on porous surfaces and up to 1200ft2 per gallon on non-porous surfaces (depends on how heavily product is applied)

​Advanced Peroxide Cleaner is in stock and available for online ordering today (click here) or by calling 317.322.5200

The Omnitec Nitro 600 Air Scrubber. 

 Essco features the Omnitec Nitro 600 Air Scrubber as our August special for only $925.00!                                    (Regular $1,095.00)

The Omnitec Nitro 600 air filtration system will help you safely meet your project requirements with a standard HEPA filter efficient to 99.97% @ 0.3 microns.  

Protecting the HEPA filter is a primary/secondary filter that is dual density, MERV 8 rated with an antimicrobial treatment, according to Omnitec Designs.

The high-density polyethylene exterior surface does not support bacterial growth and also is easy to clean. The high visibility orange/yellow color is designed for strength and smooth air flow. The polyethylene has UL 98HD flammability rating with UV inhibitor for outdoor use.

Up to five units can be stacked on top of one another all using a one 15-amp circuit, for efficient project completion.  The soft rubber handle allows for comfortable grip.

The Omnitec Nitro 600 has a built in 10” diameter ring connections for flex hoses and the interlocking hinged door has a 3.5” deep compartment for variety of pre-filters to meet your job need.  

Weighing only 36 lbs. this air filtration system will allow for easy mobility for your next project.

Please call 317.322.5200 or e-mail dstemmler@esscoindy for more information or to place your order today! 

Essco is proud to announce a new safe new product to be used in mold removal, black water/sewage clean up, hard surfaces (desks, counter tops, etc.) cleaning and disinfecting.  It is the first new disinfectant technology approved by the EPA in over 30 years and works twenty times faster than traditional disinfectants.   Fiberlock Shockwave Green24 is a broad spectrum, non-corrosive, odorless, colorless, botanical based disinfectant.

ShockWave Green24 kills most deadly microorganisms in 10 minutes, yet is safe for everyday use according to Fiberlock.  It contains no ammonia, chlorine, oxidizers, phenols, alcohols, dyes or fragrance.  No personal protective equipment (PPE) is required in order to use this product.  Also, warning labels or first aid statements are not needed.

ShockWave Green24 is a powerful disinfectant that kills resistant organisms such as VRE and MRSA. Unlike other disinfectants ShockWave Green24 offers added protection by continuing to provide residual efficacy 24 hours after application.

The Category IV rating (lowest toxicity), rapid kill and residual protection makes ShockWave Green24 an ideal solution for everything from infection control to children's toys.  Take advantage of our June special and buy a gallon for the special introductory price of only $29.95!  Or call us today for more information.

A respiratory protection program is important to establish in certain work environments in order to control occupational diseases caused by breathing air contaminated with harmful dusts, fumes, gases, smoke and many other potentially harmful vapors.  OSHA (the Occupational Safety and Health Administration) and NIOSH (the National Institute of Occupational Safety and Health) regulations define all specific requirements, which must be followed.  Employers must follow the requirements of these governmental regulations, both the general regulations and the regulations when it comes to certain industries such as lead, silica dust, asbestos and ammonia.  According to OSHA’s Respiratory Protection Standard (29 CFR 1910.134) there are 7 key elements that every respiratory protection program should have:

1. A written plan detailing how the program will be administered
2. A complete assessment and knowledge of respiratory hazards that ill be encountered in the workplace
3. Procedures and equipment to control respiratory hazards, including the use of engineering controls and work practices designed to limit or reduce employee exposures to such hazards
4. Guidelines for the proper selection of appropriate respiratory protective equipment
5. An employee training program covering hazard recognition, the dangers associated with respiratory hazards, and proper care and use of respiratory equipment
6. Inspection, maintenance, and repair of respiratory protective equipment
7. Medical surveillance of employees

Essco offers a wide variety of products to help insure a safe work environment and we are happy to answer any questions you may have. Click here to see our line of test kits.
More information about Respiratory Protection Programs can be found at OSHA.com.

Molds can be found almost anywhere; they can grow on virtually any organic substance, as long as moisture and oxygen are present. There are molds that can grow on wood, paper, carpet, foods, and insulation. When excessive moisture accumulates in buildings or on building materials, mold growth will often occur, particularly if the moisture problem remains undiscovered or un addressed.

Mold is found both indoors and outdoors. Mold can enter your home through open doorways, windows, vents, and heating and air conditioning systems. Mold in the air outside can also attach itself to clothing, shoes, bags, and pets can and be carried indoors.  If there is mold is growing in your home or office, it is important to clean up the mold and fix the moisture problem. Mold growth can be removed from hard surfaces with commercial products that Essco carries.

MOLD PREVENTION TIPS

• Keep the humidity level in your home between 40% and 60%. Use an air conditioner or a dehumidifier during humid months and in damp spaces, like basements.
• Be sure your home has enough ventilation. Use exhaust fans which vent outside your home in the kitchen and bathroom. Make sure your clothes dryer vents outside your home.
• Fix any leaks in your home's roof, walls, or plumbing so mold does not have moisture to grow.
• Clean up and dry out your home thoroughly and quickly (within 24-48 hours) after flooding.
• Add mold inhibitors to paints before painting.
• Clean bathrooms with mold-killing products.
• Remove or replace carpets and upholstery that have been soaked and cannot be dried promptly. Consider not using carpet in rooms or areas like bathrooms or basements that may have a lot of moisture.

Essco carries a wide variety of products to help with mold from small home to large commerical areas. 

Contact us today for more information on equipment and chemical products to address any mold issues.